Sitemap

• Homepage
• News
• Company
  • Management
  • Quality Management
  • Equipment
  • Awards
• Services
  • Hip replacement
    • ISO 7206-4 and -6 Dynamic fatigue test*
    • ISO 7206-10 Static head burst test
    • ISO 7206-13 Femoral head torque test*
    • ISO 21535 Range of motion analysis (ROM)*
    • ASTM F1820 Insert push-out test*
    • ASTM F1875 Corrosion test of taper connections
    • ASTM F2009 Femoral head pull-off test*
  • Knee replacement
    • ISO 14879-1 Tibial plateau dynamic fatigue test*
    • ASTM F3210 Femoral component fatigue test*
    • ASTM F1223 Restriction of the range of motion (ROM)
    • ASTM F2722 Mobile Bearing torque test
    • ASTM F2723 Mobile Bearing translation test
    • ASTM F2724 Mobile Bearing dislocation test
    • ASTM F2777 Dynamic fatigue test under deep flexion
  • Shoulder replacement
    • ASTM F1829 Glenoid shear test
    • ASTM F2028 Glenoid loosening test*
  • Spinal implants
    • ISO 12189 Fatigue test using anterior support
    • ASTM F2193 Components of Spinal Implants
    • ASTM F1798 Partial constructions for spinal implants
    • ASTM F1717 Corpectomy model*
    • ASTM F2077 Intervertebral fusion devices*
    • ASTM F2267 Subsidence test
    • ASTM F2624 Extra-discal spinal constructs
    • ASTM F2694/F2790 Lumbar total facet prothesis
    • ASTM F2706 Occipital-cervical and occipital-cervical-thoracic spinal implant constructs
  • Trauma/Osteosynthesis
    • ASTM F382 Bone plates bending test*
    • ASTM F384 Angled fixation devices bending test*
    • ASTM F543 Cortical bone screws*
    • ASTM F564 Bone staples
    • ASTM F1264 Intramedullary rods*
    • ASTM F1541 Classification of external fixation devices
    • ASTM F2180 Specification of strands and cables
    • IP-05-05 Fatigue test of gliding nails
  • Dental implantology
    • ISO/TS 13498 Endosseous implants torsion test*
    • ISO 14801 Endosseous implants fatigue test*
    • ISO 11953 Hand torque instruments*
    • IP-06-02 Fatigue test bridge constructs
    • Conservative Dentistry ISO 3630* and ISO 6876*
  • Breast implants
    • FDA Docket No. 2004D-0124 Fatigue test*
    • ASTM F703 Gel Bleeding*
    • ISO 14607:2018 Annex B Tests for shell integrity*
    • ISO 14607:2018 Annex C.1 Fatigue Test*
    • ISO 14607:2018 Annex C.2 Impaction Test*
    • ISO 14607:2018 Annex D injection site competence*
    • ISO 14607:2018 Annex E Cohesion Test*
    • ISO 14607:2018 Annex H Surface characteristics*
    • ISO 14607:2007 Static rupture strength
  • Coatings
    • ASTM F 1044 Shear strength*
    • ASTM F 1147 Tension testing*
    • ISO 13179-1 and ASTM F1160 Coatings*
    • ISO 13779-4 Adhesive strength HAP*
    • ASTM F1978 Abrasion resistance of metallic coatings*
  • Surgical instruments
    • ASTM F1089 Surgical Instruments*
    • ISO 3630-1 Endodontic Instruments*
    • ISO 11953 Hand torque instruments *
  • Bone cement
    • ISO 5833 Bone cement*
  • Packaging
    • ASTM D642 Compression test for packaging*
    • ASTM F88 Seal strength*
    • ASTM F1886 Visual inspection*
    • ASTM F2203 Linear dimensions*
    • ASTM F1929 Dye penetration test*
    • ASTM F2096 Bubble Emission Testing*
  • Personal protective equipment
    • DIN EN 455-1 Impermeability of medical gloves*
    • DIN EN 455-2 Physical properties*
    • DIN EN 455-4 Shelf life determination*
  • Numerical simulation
  • Failure analysis
  • Consulting
  • INNOPROOF Academy
• Contact
• Sitemap
• General terms and conditions
• Privacy
• Newsletter
• Legal Notice